QHY600PH Series+QHYCFW3L+OAGM Combo

Kit C1 is for connecting MPCC that requires 55mm BFL and M48 interface to Camera with CFW3L Only. C1 is standard accessories of QHY600M PH and QHY600L, so you needn’t purchase it.

Note: The combo QHY600M-PH+CFW3L+OAG combo are not compatible for MPCC because of limited BFL. If you need an MPCC while using the CFWL and OAG at the same time, or use DSLR Lens, we recommend you choose QHY600 SBFL version.

B1: Connecting MPCC that requires 55mm BFL and M48 interface to Camera with CFWL and OAG. B1 is standard accessories of QHY600M SBFL and QHY268M, so you needn’t purchase it if you’ve had the cams.

Note:

1. If your MPCC requires a BFL different from 55mm, this adjustment can be made by selecting the appropriate spacer between the MPCC and the OAG.  For example, an MPCC that requires 57.5mm can be used instead by adding a spacer ring or rings that add 2.5mm of BFL. to the diagram above.
2. If you don’t use an OAG, you can use a 10mm spacer adapter in the adapter kits to replace the original position of OAG.
3. Put OAG at the position next to the M48 Output to make both main cam and guiding cam focused.

B2: Connect Canon EF lens to Camera with filter wheel

B3: Connect Nikon F Lens to Camera with Filter Wheel.

Note: The current Nikon adapter used here is different from the 10mm adapter we used to provide. Now it has a back focal length increment of 12mm.