HOME > News >
QHY268C APS-C 彩色全画幅相机又出新作品啦 来自SimonTodd
2020 / 07 / 29

As many of you know, I have been using QHY cameras for a while, but with my plan to move to a RASA telescope next year and wanting to image with a bigger sensor than the QHY183M I decided to go for a bigger sensor but moving away from Mono, the latest addition to the QHY familly is the QHY268C Photographic Version. I had been talking to the QHY team for a long time about this particular camera, and finally I have one.

The QHY268C is a once shot colour camera based on the APS-C Sized back illimunated Sony IMX571 sensor, the camera has a true 16-Bit Analog to Digital Convertor (ADC), now there are a few camera models out there using this sensor,

 

 

QHY cameras have come along way since I bought my QHY183M, one of the things QHY has really worked on is amp glow, my early version of the QHY183M was renowned for was amp glow, which could be removed in image calibrations, but the QHY268C produces no amp glow whatsoever, below is a dark frame of 600S taken at -13.5C and you can clearly see there is no evidence of amp glow.
 

Attaching to the telescope was pretty straight forward as I had already planned the imaging train before the camera arrived, since I will be using the SharpStar 15028HNT F2.8 Paraboloid Astrograph which has an M48 thread, I decided to keep the whole imaging train at M48 except for the camera of course which has an M54 thread, so I did not actually need to use any of the adapters that came with the camera, the reason for this is because I wanted to include a filter drawer, so my image train consists of the following (from telescope to camera)

  • TSOAG9 – TS Off Axis Guider (9mm)
  • TSOAG9-M48 – TS M48 Adapter for the OAG (2.5mm)
  • TSFSLM48 – TS 2″ Filter Drawer with M48 Thread (18mm)
  • M48AbstimmA05 – TS Optics 0.5mm Aluminium spacing ring (0.5mm)
  • TSM54a-m48i – TS M48 to M54 Adapter (1.5mm)
  • QHY268C with M54 Centering Adapter (23.5mm)

As you can see with all the above I reach my desired back focus of 55mm perfectly, if I was not going to be using a filter drawer (For my Optolong L-Pro and L-eXtreme filters), I would probably have stuck with the spacers that came with the camera. Below is a picture of the camera successfully connected to the telescope.

As far as settings go, after speaking with QHY on this at great length, I will be imaging in Mode 0 (Photographic mode) to avail of the massive 75ke full well, offset I will leave at 30, but Gain I will use two different settings, I will use Gain 0 for most bright objects with the L-Pro filter, but for the L-eXtreme, I’ll probably set a gain level of 26, luckily with SGPro I can set the gain level per object. From a cooling perspective I always image at -20C, one thing I have noticed is that this camera cools to exactly -35C below ambient, I tested this when the ambient temperature was 20.10 degrees, and the camera cooled down to -14.9C, it was always 25C lower until the ambient dropped below 15C and the camera remained at my setting of -20C.




 

至于设置,详细地与QHY说话后,我将成像模式0(摄影模式)充分利用巨大的75克,抵消我将离开在30,但获得我将使用两个不同的设置,我将用最明亮的对象获得0 L-Pro过滤器,但是L-eXtreme,我可能会设置一个获得26,幸运的是SGPro我可以设置每个对象增益水平。从冷却的角度来看我总是图像-20 c,我注意到的一件事是,这个相机冷却到-35 c环境下,我测试了这个当环境温度为20.10度,和相机冷却到-14.9摄氏度,它总是25 c低,直到环境低于15 c和-20 c的相机保持在我的设置。

 

相机的制造质量和预期的QHY183M一样,我注意到的一件事是,QHY268C的风扇比183M安静得多。相机技术细节:

Newsletter
         
Meet us
Contact us

  503, Block A, Singularity Center, Shahe Town, Changping District, Beijing, China, 102206

  +86(10)-80709022-602

  sales@qhyccd.com

Copyright  2011-2018  QHYCCD    Question  |  Navigation  |  Forum