QHYCCD

QHYCCD1.DLL V21.2.19.19 Error under Windows 10 using SGPRO

Good day,

I have started testing my 268M using Sequence Generator Pro (SGPRO) by just taking sets of darks. I do understand it is not strictly necessary but I just want to make sure I understand the camera. It crashed SGPRO twice with PC restart in between at around 294 subs. I have attached the Windows Events related to this.

Your assistance will be much appreciated

Re: QHYCCD1.DLL V21.2.19.19 Error under Windows 10 using SGPRO
« Reply #1 on: March 15, 2021, 08:59:59 PM »
Hi,
    Which version system driver and ASCOM plug-in driverdo you use?And do you use other device at the same time?Or you only connected QHY268 camera?
Best Regards,
QinXiaoXu

Re: QHYCCD1.DLL V21.2.19.19 Error under Windows 10 using SGPRO
« Reply #2 on: March 16, 2021, 02:24:09 AM »
Hi,
    Which version system driver and ASCOM plug-in driverdo you use?And do you use other device at the same time?Or you only connected QHY268 camera?
Best Regards,
QinXiaoXu

Only the QHY268M was connected. I was busy taking darks. The ASCOM driver version is

ASCOM PLATFORM 6.5 SP1 - 6.5.1.3234

 The QHY ASCOM Driver is the latest that comes from your All-In-One System Pack (Beta)



Re: QHYCCD1.DLL V21.2.19.19 Error under Windows 10 using SGPRO
« Reply #3 on: March 16, 2021, 08:06:16 PM »
    OK,I will test it,please wait some time.
Best Regards,
QinXiaoXu

Re: QHYCCD1.DLL V21.2.19.19 Error under Windows 10 using SGPRO
« Reply #4 on: March 17, 2021, 02:37:35 AM »
Hi,
    I tested it,ASCOM platform is 6.5 SP1,ASCOM driver is 21.02.20.12,SDK version is 21.02.19.19,Firmware version is 21.02.20,SGP version is 3.0.2.94.It can work normally with no crash issue.
    Well,did you test it with different software?EZCAP_Qt,MDL or old version SGP?
Best Regards,
QinXiaoXu