QHYCCD

QHY600M-PH FPGA update to reduce or eliminate noise?

QHY600M-PH FPGA update to reduce or eliminate noise?
« on: January 10, 2021, 06:48:35 PM »
Hello QHY engineers,

About last week, I accidentally found an interesting article somewhere at your QHY web site about upgrading the FPGA for QHY600M-PH cameras but for the life of me I cannot find it anymore.

So, if you have a FPGA upgrade for QHY600M cameras to help reduce or almost eliminate noise, please give me a link and I would like to read it again.

Thank you,
Peter

Re: QHY600M-PH FPGA update to reduce or eliminate noise?
« Reply #1 on: January 10, 2021, 11:10:12 PM »
I found the article:

https://www.qhyccd.com/index.php?m=content&c=index&a=show&catid=23&id=281

This applies to QHY600 cameras built before 2019.12.23 (December 23, 2019). I received my QHY600M on 2020.6.9 (June 9, 2020) and I think the serial number is 049577. I hope my camera already has this update.

Do I really have to ship the camera back to China if I don't have this update? Couldn't I re-program the FPGA with your special programming software via USB port?

Thanks,
Peter

Re: QHY600M-PH FPGA update to reduce or eliminate noise?
« Reply #2 on: February 25, 2021, 07:49:53 AM »
I found the article:

https://www.qhyccd.com/index.php?m=content&c=index&a=show&catid=23&id=281

This applies to QHY600 cameras built before 2019.12.23 (December 23, 2019). I received my QHY600M on 2020.6.9 (June 9, 2020) and I think the serial number is 049577. I hope my camera already has this update.

Do I really have to ship the camera back to China if I don't have this update? Couldn't I re-program the FPGA with your special programming software via USB port?

Thanks,
Peter

I sent my camera 4 months ago and I have not received it.
I hope it comes to me soon.
I think they replace electronics.
Greetings and luck

Yuki

  • *****
  • 403
    • View Profile
Re: QHY600M-PH FPGA update to reduce or eliminate noise?
« Reply #3 on: February 25, 2021, 08:06:46 PM »
I found the article:

https://www.qhyccd.com/index.php?m=content&c=index&a=show&catid=23&id=281

This applies to QHY600 cameras built before 2019.12.23 (December 23, 2019). I received my QHY600M on 2020.6.9 (June 9, 2020) and I think the serial number is 049577. I hope my camera already has this update.

Do I really have to ship the camera back to China if I don't have this update? Couldn't I re-program the FPGA with your special programming software via USB port?

Thanks,
Peter

I sent my camera 4 months ago and I have not received it.
I hope it comes to me soon.
I think they replace electronics.
Greetings and luck

Hi,

Can you send your information to me?

My email is zyq@qhyccd.com

I will check if we receive your camera.

Best Regards

Yuki

  • *****
  • 403
    • View Profile
Re: QHY600M-PH FPGA update to reduce or eliminate noise?
« Reply #4 on: February 25, 2021, 08:13:47 PM »
I found the article:

https://www.qhyccd.com/index.php?m=content&c=index&a=show&catid=23&id=281

This applies to QHY600 cameras built before 2019.12.23 (December 23, 2019). I received my QHY600M on 2020.6.9 (June 9, 2020) and I think the serial number is 049577. I hope my camera already has this update.

Do I really have to ship the camera back to China if I don't have this update? Couldn't I re-program the FPGA with your special programming software via USB port?

Thanks,
Peter

Hi,

Your camera should already has this update.

Do you think your camera have noise?

Can you send FITS to us?

Best Regards

Re: QHY600M-PH FPGA update to reduce or eliminate noise?
« Reply #5 on: February 26, 2021, 01:48:48 AM »
I found the article:

https://www.qhyccd.com/index.php?m=content&c=index&a=show&catid=23&id=281

This applies to QHY600 cameras built before 2019.12.23 (December 23, 2019). I received my QHY600M on 2020.6.9 (June 9, 2020) and I think the serial number is 049577. I hope my camera already has this update.

Do I really have to ship the camera back to China if I don't have this update? Couldn't I re-program the FPGA with your special programming software via USB port?

Thanks,
Peter

I sent my camera 4 months ago and I have not received it.
I hope it comes to me soon.
I think they replace electronics.
Greetings and luck

Hi,

Can you send your information to me?

My email is zyq@qhyccd.com

I will check if we receive your camera.

Best Regards

Thanks Yuki, I have sent you the information by email
Best Regards

Re: QHY600M-PH FPGA update to reduce or eliminate noise?
« Reply #6 on: February 28, 2021, 02:39:06 PM »
I found the article:

https://www.qhyccd.com/index.php?m=content&c=index&a=show&catid=23&id=281

This applies to QHY600 cameras built before 2019.12.23 (December 23, 2019). I received my QHY600M on 2020.6.9 (June 9, 2020) and I think the serial number is 049577. I hope my camera already has this update.

Do I really have to ship the camera back to China if I don't have this update? Couldn't I re-program the FPGA with your special programming software via USB port?

Thanks,
Peter

Hi,

Your camera should already has this update.

Do you think your camera have noise?

Can you send FITS to us?

Best Regards

Thank you for answering. I just wanted to make sure I have the update. I don't think my camera has noise and my FIT files look pretty clean.

Peter