QHYCCD

EZCAP_QT test version

EZCAP_QT test version
« on: November 19, 2017, 08:05:34 PM »
Hi all,
    This is a test version EZCAP_QT,here is the camera it support:
QHYIMG2PRO,
QHY5LIIC,QHY5HIIC,QHY5PIIC,QHY5RIIC,QHY5TIIC,
QHY5III174C,QHY5III178M,QHY5III224C,
QHY90A,QHY695A,QHY16200A,QHY16803A,
QHY174C,QHY178C,QHY224C,QHY290M,QHY163M,QHY165C,QHY168C,QHY183C,QHY367C,QHY290C,QHY21M,QHY22M,QHY23M
Above all cameras single and live mode is well,bin is also well.

Follow is some issues:
QHY5III174C,QHY5III178M,QHY5III224C,QHY224C,QHY290M,QHY290C,QHY367C,QHY90A,QHY695A,QHY16200A,QHY16803A:Disconnect and reconnect,software will crash.
QHY183C:exposure time more than 2.5s,can't read out from camera.
QHY163M:when download image click stop button,image will become black,and reconnect EZCAP_QT will crash.
QHY178C:after stop exposure,stop download,image will become bad sometime.
QHY247C:can't take a image,click capture or live software will crash.
QHY21M,QHY22M,QHY23M:when downloading click stop,next image can't download or image become bad.more click stop when download maybe make software crash.
Ignore overscan function is not very well now.
Download address:
https://www.dropbox.com/s/brd1dz2zx2hujoa/EZCAP.zip?dl=0

If you find any issue or bug when you use it,please relpy leave a message here,many thanks.
« Last Edit: November 19, 2017, 08:09:26 PM by QinXiaoXu »

Re: EZCAP_QT test version
« Reply #1 on: November 30, 2017, 09:06:26 PM »
Hello,

Happy Sweet December to you all!

Downloaded.  Installed but camera detection not working on my old QHY5.

Please help. 

Thanks & regards,

boothee



Hi all,
    This is a test version EZCAP_QT,here is the camera it support:
QHYIMG2PRO,
QHY5LIIC,QHY5HIIC,QHY5PIIC,QHY5RIIC,QHY5TIIC,
QHY5III174C,QHY5III178M,QHY5III224C,
QHY90A,QHY695A,QHY16200A,QHY16803A,
QHY174C,QHY178C,QHY224C,QHY290M,QHY163M,QHY165C,QHY168C,QHY183C,QHY367C,QHY290C,QHY21M,QHY22M,QHY23M
Above all cameras single and live mode is well,bin is also well.

Follow is some issues:
QHY5III174C,QHY5III178M,QHY5III224C,QHY224C,QHY290M,QHY290C,QHY367C,QHY90A,QHY695A,QHY16200A,QHY16803A:Disconnect and reconnect,software will crash.
QHY183C:exposure time more than 2.5s,can't read out from camera.
QHY163M:when download image click stop button,image will become black,and reconnect EZCAP_QT will crash.
QHY178C:after stop exposure,stop download,image will become bad sometime.
QHY247C:can't take a image,click capture or live software will crash.
QHY21M,QHY22M,QHY23M:when downloading click stop,next image can't download or image become bad.more click stop when download maybe make software crash.
Ignore overscan function is not very well now.
Download address:
https://www.dropbox.com/s/brd1dz2zx2hujoa/EZCAP.zip?dl=0

If you find any issue or bug when you use it,please relpy leave a message here,many thanks.
254mm, 1150mm, Newtonian Reflector on EQ5 Mount with DK3 Drives, QHY5 Planetary Imager, Yangon, MYANMAR.

Re: EZCAP_QT test version
« Reply #2 on: November 30, 2017, 10:39:39 PM »
Hello,

Happy Sweet December to you all!

Downloaded.  Installed but camera detection not working on my old QHY5.

Please help. 

Thanks & regards,

boothee



Hi all,
    This is a test version EZCAP_QT,here is the camera it support:
QHYIMG2PRO,
QHY5LIIC,QHY5HIIC,QHY5PIIC,QHY5RIIC,QHY5TIIC,
QHY5III174C,QHY5III178M,QHY5III224C,
QHY90A,QHY695A,QHY16200A,QHY16803A,
QHY174C,QHY178C,QHY224C,QHY290M,QHY163M,QHY165C,QHY168C,QHY183C,QHY367C,QHY290C,QHY21M,QHY22M,QHY23M
Above all cameras single and live mode is well,bin is also well.

Follow is some issues:
QHY5III174C,QHY5III178M,QHY5III224C,QHY224C,QHY290M,QHY290C,QHY367C,QHY90A,QHY695A,QHY16200A,QHY16803A:Disconnect and reconnect,software will crash.
QHY183C:exposure time more than 2.5s,can't read out from camera.
QHY163M:when download image click stop button,image will become black,and reconnect EZCAP_QT will crash.
QHY178C:after stop exposure,stop download,image will become bad sometime.
QHY247C:can't take a image,click capture or live software will crash.
QHY21M,QHY22M,QHY23M:when downloading click stop,next image can't download or image become bad.more click stop when download maybe make software crash.
Ignore overscan function is not very well now.
Download address:
https://www.dropbox.com/s/brd1dz2zx2hujoa/EZCAP.zip?dl=0

If you find any issue or bug when you use it,please relpy leave a message here,many thanks.

Thank you.
Well,did you download firmware for QHY5?
This test version can't auto download firmware temporarily.

Re: EZCAP_QT test version
« Reply #3 on: November 30, 2017, 10:43:01 PM »
You can find method of downloading firmware at this board,or wait several days for a version that solve this issue.
« Last Edit: November 30, 2017, 10:48:17 PM by QinXiaoXu »

Re: EZCAP_QT test version
« Reply #4 on: November 30, 2017, 10:54:27 PM »
Here is my QHY Camera.  I was busy and away from Astrophotography after I bought the camera.  Now I got some more time to play with it.  So I want to tray again.  Please help me start up my camera. 

Thanks a lot.

Clear Skies!

boothee

254mm, 1150mm, Newtonian Reflector on EQ5 Mount with DK3 Drives, QHY5 Planetary Imager, Yangon, MYANMAR.

Re: EZCAP_QT test version
« Reply #5 on: November 30, 2017, 10:58:39 PM »
Thanks for your kind reply.
Yes, I did.  But red light never lit up.  Mine is a very early version of QHY5 I bought in 2017.  I did a little bit of testing on win computer in 2007/8.  It did well.  Now I'm already a Mac user and don't know where to start.  Please help.

Thank you so much.

boothee



[/quote]

Thank you.
Well,did you download firmware for QHY5?
This test version can't auto download firmware temporarily.
[/quote]
254mm, 1150mm, Newtonian Reflector on EQ5 Mount with DK3 Drives, QHY5 Planetary Imager, Yangon, MYANMAR.

Re: EZCAP_QT test version
« Reply #6 on: December 01, 2017, 02:23:17 AM »
Thanks for your kind reply.
Yes, I did.  But red light never lit up.  Mine is a very early version of QHY5 I bought in 2017.  I did a little bit of testing on win computer in 2007/8.  It did well.  Now I'm already a Mac user and don't know where to start.  Please help.

Thank you so much.

boothee




Thank you.
Well,did you download firmware for QHY5?
This test version can't auto download firmware temporarily.
[/quote]
[/quote]

Hi,
    I have tested QHY5 on my MacBook,it can work well.After I download firmware,its red light lit up.And I use EZCAP_QT connect QHY5 to get some pictures.
    But there is a bad news,because I modified EZCAP_QT,I need take some time to release it.
    If you have other method to use QHY5,you only need download firmware.Here is the method:
    1.download two zip file and unzip them at where you like,for example ~/libqhy
    2.input command on terminal
      $cd ~/libqhy
      $g++ downloadfirm.cpp -o df -I ~/libqhy -L ~/libqhy -lqhy
      $./df
    after sever seconds,red light can lit up,If you input "system_profiler SPUSBDataType" on terminal,you can see PID become 0x296d and VID become 0x16c0

Re: EZCAP_QT test version
« Reply #7 on: December 01, 2017, 03:50:22 AM »

[/quote]

Hi,
    I have tested QHY5 on my MacBook,it can work well.After I download firmware,its red light lit up.And I use EZCAP_QT connect QHY5 to get some pictures.
    But there is a bad news,because I modified EZCAP_QT,I need take some time to release it.
    If you have other method to use QHY5,you only need download firmware.Here is the method:
    1.download two zip file and unzip them at where you like,for example ~/libqhy
    2.input command on terminal
      $cd ~/libqhy
      $g++ downloadfirm.cpp -o df -I ~/libqhy -L ~/libqhy -lqhy
      $./df
    after sever seconds,red light can lit up,If you input "system_profiler SPUSBDataType" on terminal,you can see PID become 0x296d and VID become 0x16c0
[/quote]

Thank you so much for your kind reply with the solution.  I've download both files and will do a test tonight when I get back home.

I'll let you know after I tried. 

Clear Skies!

boothee
254mm, 1150mm, Newtonian Reflector on EQ5 Mount with DK3 Drives, QHY5 Planetary Imager, Yangon, MYANMAR.

Re: EZCAP_QT test version
« Reply #8 on: December 01, 2017, 11:48:55 AM »
Hi,

I'm happy to test.  Kindly let me have step by step instruction please.

Thanks,

boothee
254mm, 1150mm, Newtonian Reflector on EQ5 Mount with DK3 Drives, QHY5 Planetary Imager, Yangon, MYANMAR.

Re: EZCAP_QT test version
« Reply #9 on: December 02, 2017, 12:41:55 AM »
Hi,

I have extracted all the files and copy them all into libqhy folder in Documents.  What should I do next please.

Thank you,

boothee
254mm, 1150mm, Newtonian Reflector on EQ5 Mount with DK3 Drives, QHY5 Planetary Imager, Yangon, MYANMAR.

Re: EZCAP_QT test version
« Reply #10 on: December 03, 2017, 07:18:41 PM »
Hi,

I have extracted all the files and copy them all into libqhy folder in Documents.  What should I do next please.

Thank you,

boothee
Sorry,I am in weekend yesterday.
Well~~~did you copied these files to ~/Documents/libqhy?And did you download firmware follow above step?Now did your red light lit up?If you download firmware but red light is not lit up,please let me know how did you download firmware detailedly.

Re: EZCAP_QT test version
« Reply #11 on: December 04, 2017, 12:32:04 AM »
oh sorry,I forget add firmware.you need download firmware.zip and unzip it at /lib/firmware/qhy

Re: EZCAP_QT test version
« Reply #12 on: December 21, 2017, 10:17:46 PM »
Hi everyone,
    I recampiled EZCAP_QT for Mac,now it solved a issue about some camers reconnect make software crash,and it can auto download firmware,so you just need wait 4~5s when you first connect your camera after plugin.
    Here is the download address:https://www.dropbox.com/s/y6teaq0pelfgg93/EZCAPLatestEdition.zip?dl=0

Re: EZCAP_QT test version
« Reply #13 on: July 02, 2018, 08:17:17 AM »

Re: EZCAP_QT test version
« Reply #14 on: May 14, 2020, 11:47:20 PM »
Are there any updates to the Mac software?  I haven't seen anything new in the past few years.  EZCap isn't very stable on the 185C.