QHYCCD

QHY9 problem

QHY9 problem
« on: March 26, 2014, 12:05:46 PM »
some ideas?!

Re: QHY9 problem
« Reply #1 on: April 22, 2014, 02:38:38 AM »
Hi,

a few things to check.  In camera settings check your clamp setting along with USB readout turned off.


I had similar issues and mine was relating to the cable from the DC201 box to the camera, as mine was damaged and i replaced it and it was fine. Often people sometimes plug in the wrong way round by mistake, the large bulge end needs to be plugged into the DC201 power unit.

Rich.

QiuHY

  • *****
  • 5005
    • View Profile
    • Email
Re: QHY9 problem
« Reply #2 on: April 22, 2014, 01:36:11 PM »
Hello,
         This problem looks like the water inside the CCD chamber. You need open CCD chamber and use warm air to dry it for 15minutes .The CCD chamber is a retangle construction. You need open the camera case -> take off the front board -> unscrew four screw of CCD chamber -> open CCD chamber -> dry it.


Best regards,
Qiu Hongyun