QHYCCD

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - QinXiaoXu

Pages: [1] 2 3 ... 98
1
QHYCCD Standard Software Q&A / Re: FIlter Wheel 3
« on: May 17, 2021, 09:08:17 PM »
Hi,
    Did you switch CFW's work mode to USB mode?Please check it here:https://www.qhyccd.com/index.php?m=content&c=index&a=show&catid=68&id=177
    And maybe we can do a remote control for this.
Best Regards,
QinXiaoXu

2
Hi,
    Please download this package and select this option when install.
    After install,please put the qhyccdwdm.dll to C:\Program Files (x86)\QHYCCD\NativeWDM\driver to replace old one.
Best Regards,
QinXiaoXu

3
QHYCCD Standard Software Q&A / Re: QHY5P-II-M and 2021.3.13 drivers
« on: May 17, 2021, 08:15:45 PM »
Hi,
    Please try this version driver,https://www.qhyccd.com/file/repository/latestSoftAndDirver/Driver/QHYCamerasDriver20210510.zip
Best Regards,
QinXiaoXu

4
QHYCCD Standard Software Q&A / Re: FIlter Wheel 3
« on: May 16, 2021, 08:17:43 PM »
Hi,
    Did you insatall Serial Port driver?If not,you can install it,normally after install it,CFW device will show in Device Manager like this.
Best Regards,
QinXiaoXu

5
你好,
    我试着在GitHub上下载源码进行编译,全部一起编译时遇到了一个错误,这个你之前有遇到过吗?
    现在是只编译QHY的INDI然后安装使用,不过没发现有21.04.15版本的SDK,我这里包含的SDK是21.2.11版本的。
    另外我测试了,同时连两个相机到树莓派USB3.0接口的情况,我这里的情况比较严重,同时连时无论怎么连,第二个相机都会导致系统卡住。不确定是否和供电有关系,我准备用有源HUB再测试看看。

6
QHYCCD SDK FOR WINDOWS / Re: QHY CFW3 firmware source code?
« on: May 14, 2021, 03:28:20 AM »
Hi,
    Dr.Qiu reply me that this is OK,here is the ASCOM driver soucrce code,normally I compile it by VS2008 with C#.
Best Regards,
QinXiaoXu

7
QHYCCD SDK FOR WINDOWS / Re: QHY CFW3 firmware source code?
« on: May 14, 2021, 03:12:28 AM »
Here is the serial port driver.

8
QHYCCD SDK FOR WINDOWS / Re: QHY CFW3 firmware source code?
« on: May 14, 2021, 03:08:05 AM »
Hi,
    I asked this to Dr.Qiu,but he has not reply me,it seem we need take some time to wait.
    And here is a software,its function is similarly with ASCOM driver,he can control CFW via USB and send command directly to CFW,and you need install serial port driver first.You can try it.
    And this is the command we supported now.https://note.youdao.com/share/?token=28CA9934B68E480993367C0CEA37FB3B&gid=7195236
Best Regards,
QinXiaoXu

9
QHYCCD Standard Software Q&A / Re: FIlter Wheel 3
« on: May 13, 2021, 08:29:04 PM »
Hi,
    How do you connect CFW?Via 4PIN to camera or USB to PC?
    If you connect via 4PIN you can see it in control pannel.See screenshot 1.
    If you connect via USB you need set RS232 ASCOM driver in SharpCap Setting->Hardware.See screenshot 2.
    Or we also can do remote control.
Best Regards,
QinXiaoXu

10
QHYCCD Standard Software Q&A / Re: FIlter Wheel 3
« on: May 12, 2021, 08:25:28 PM »
Hi,
    Well,you installed a Windows Virtual Machine and installed Mac version Nebulosity on Mac,right?
    In fact,I'm not sure if camera can be found by Mac version Nebulosity,I didn't test it,you need install Windows version Nebulosity in Virtual Machine.The 5IIISeries driver and ASCOM only can be used on Windows.And I'm not sure if Virtual Machine can work well with Camera.
Best Regards,
QinXiaoXu

11
Image Issue Q&A / Re: 268C Binning Behaviour
« on: May 11, 2021, 09:33:43 PM »
Hi,
    I tested QHY268C and SGP with same version ASCOM driver and SDK,but I can only get one peak in 1X1 bin mode,this is different with your camera,can we do remote control for this?I think this can help us check the issue.
    My email is qxx@qhyccd.com,my work time is 9:00 am ~ 17:30 pm,Mon to Fri,I'm in Beijing,now my time is 10:30 am.
Best Regards,
QinXiaoXu

12
Hi,
    How do you connect camera to software?via ASCOM driver?And if you use other software can it connect?For example EZCAP_Qt,SharpCap.
Best Regards,
QinXiaoXu

13
QHYCCD Standard Software Q&A / Re: FIlter Wheel 3
« on: May 11, 2021, 08:09:14 PM »
Hi,
    Which version ASCOM plug-in and system driver do you use?And which camera do you use?
    About Nebulosity,you need setup CFW ASCOM plug-in driver to make CFW work with camera.
    About connection issue,I'm not sure,you can contact our support(cha@qhyccd.com) or after sales(zyq@qhyccd.com).
Best Regards,
QinXiaoXu

14
QHYCCD SDK FOR WINDOWS / Re: QHY CFW3 firmware source code?
« on: May 10, 2021, 08:58:18 PM »
    OK,I will inquire this to Dr.Qiu,if he agree,I will public the source code to you.
Best Regards,
QinXiaoXu

15
Hi,
    My colleagues are modifying FPGA about this,and we also can modify driver to make camera's target temperature be setup to 15 or 20 after connect USB cable.
Best Regards,
QinXiaoXu

Pages: [1] 2 3 ... 98