QHYCCD

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - mrpizza

Pages: [1] 2
1
Image Issue Q&A / Re: QHY268M download hangup
« on: April 20, 2021, 11:58:19 AM »
Hi QinXiaoXu,
I sent you email

2
Image Issue Q&A / Re: QHY268M download hangup
« on: April 15, 2021, 08:20:53 AM »
I forgot to mention that this happens when taking a single image in SGP and there shouldn't be a buffering issue with single image it just reports dowloading image to no avail.

3
Image Issue Q&A / Re: QHY268M download hangup
« on: April 15, 2021, 08:13:36 AM »
My situation sounds different, when it goes into download loop  I have to cancel image acquisition to stop the looping.

Chris

4
Image Issue Q&A / QHY268M download hangup
« on: April 14, 2021, 09:01:50 PM »
I loaded All in One drivers on a clean Win10 machine using SGP.  The first image downloads fine often the second does the same but on third try  the green download line just scrolls across window never producing an image.  I have to abort.  I have to go into Ascom setting and change any setting by just 1 number and reconnect  and I get 1 maybe 2 more images before going into the download loop.

It is the only device connected to the computer and using supplied USB cord and feeding it 12.15V with power supply. Using High Gain factory settings.

Chris

5
Astronomy equipment Discussion board / QHY268M download hangup
« on: April 14, 2021, 08:43:10 PM »
I loaded All in One drivers on a clean Win10 machine using SGP.  The first image downloads fine often the second does the same but on third try  the green download line just scrolls across window never producing an image.  I have to abort.  I have to go into Ascom setting and change any setting by just 1 number and reconnect  and I get 1 maybe 2 more images before going into the download loop.

It is the only device connected to the computer and using supplied USB cord and feeding it 12.15V with power supply. Using High Gain factory settings.

Chris

6
QHYCCD Standard Software Q&A / Re: Uodating SDK
« on: June 01, 2020, 09:19:45 AM »
I did that and Update Checker still indicated a new SDK available.

Chris

7
QHYCCD Standard Software Q&A / Uodating SDK
« on: May 31, 2020, 09:23:10 AM »
I noticed in Update Checker there was a newer SDK available for my 163m.  Is it as simple as replacing the ".dll" file? or is there an installation process?

Chris

8
Astronomical Photography / Siamese Twins Qhy163M
« on: May 31, 2020, 09:18:24 AM »
Meade 10" f/10
Losmandy G-11 Non-goto
Celestron FF/FR f/6.3
Qhy 163M
Baader 36mm LRGB filters
L 360x45sec
RGB 36x120sec
Gain 123
Backyard observatory Palm Coast, FL

Chris

9
Mechanical Q&A / Re: 163M Cooler stopped during stress test
« on: April 01, 2020, 08:20:08 AM »
Thank you for the explanation.

Chris

10
Astronomical Photography / M100 Qhy163M
« on: March 31, 2020, 07:15:18 PM »
After getting familiar with settings and file management I processed my first "good" image.  Coming from an 8L there is a big difference in processing an LRGB image.

Meade 10" SCT
Celestron 6.3 fr/ff
Oag
Losmandy G11 digital drive
163m
Baader 36mm LRGB filters
All subs shot at Gain 200 offset 50
L 30 sec x 420
RGB 90 sec x 40

11
Mechanical Q&A / Re: 163M Cooler stopped during stress test
« on: March 31, 2020, 07:26:39 AM »
I had the same issue with my 163M last night.  I set up to take flats qith ambient temp 78f/26c and noticed in SGP that cooler was at 100% and only getting -12 when set at -15.  The night before i collected 3 hours of data at -15 same ambient temp.  I shutdown, reconnected and still 100% and -12.  Camera is 3 months old.  Do I need to return?

12
Astronomy equipment Discussion board / Re: QHYCFW3 installing filters
« on: January 13, 2020, 09:47:06 PM »
Thank you

13
Astronomy equipment Discussion board / QHYCFW3 installing filters
« on: January 07, 2020, 08:35:14 PM »
I claim ignorance. Just received this filter wheel to use 36mm unmounted filters (2mm thick).  I read the instruction found here:

 https://www.qhyccd.com/index.php?m=content&c=index&a=show&catid=30&id=186

I still do not understand which spacer or screw to use from the items included (see photo).  I'm sure it's simple but I just spent a fortune on filters and would like to do this right the first time without pinching,scratching, marring the filters.

14
Astronomical Photography / M65 & M66 QHY8L
« on: April 09, 2018, 10:44:20 AM »
I recently replaced the main board on my camera and wanted to show that the new board works just fine and thank QHY for the ease in fixing my problem.

Meade 10" SCT 6.3 reducer
186x300"
Losmandy G11

Chris

15
Image Issue Q&A / Re: QHY8L problem
« on: February 28, 2018, 10:12:02 PM »
I am happy to report that the problem has been solved.  I was sent a new circuit board and with some light soldering I was able to replace the old one and I have a "New" camera.  I want to thank the team for their help.  I am a very satisfied QHY customer!

Chris

Pages: [1] 2