QHYCCD

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - kj

Pages: [1] 2
1
Image Issue Q&A / Re: QHY294M Pro cannot find 2nd CFW (ASCOM)
« on: May 08, 2021, 01:46:18 AM »
Thank you very much. Just download and test driver for ASCOM platform 6.5, both cameras and CFWs work well.

2
Image Issue Q&A / Re: QHY294M Pro cannot find 2nd CFW (ASCOM)
« on: May 05, 2021, 11:09:56 PM »
Any progress?

3
Image Issue Q&A / Re: QHY294M Pro cannot find 2nd CFW (ASCOM)
« on: April 19, 2021, 01:48:15 AM »
Thank you

4
Image Issue Q&A / QHY294M Pro cannot find 2nd CFW (ASCOM)
« on: April 18, 2021, 07:11:53 AM »
I have installed a new QHY294m withe my rig that another QHY294m was already installed. My ASCOM image capture software cannot find the second QHY ccd 2nd filter-wheel. I have read somewhere in the forum that this can be solved after some modification in ASCOM drivers. However, those modified ASCOM drivers do not include the newer QHY camera that using Beta software version. Is it possible to make the 2nd QHY294M and the 2nd CFW work along with my first ones? I connect CFWs to cameras with 4-pins cable.

5
Image Issue Q&A / Re: Banding in 294M image
« on: January 21, 2021, 12:20:19 PM »
Dear ma_rs
The banding is almost gone if I raise gain to1600. But the broken image hits me three times tonight. Will send the screen shot shortly.
KJ

6
Image Issue Q&A / Banding in 294M image
« on: January 18, 2021, 08:09:01 PM »
Hi,

I have used new QHY294M for a couple of nights. There is a problem in horizontal banding in every image. The problem is getting worse in bright background and stacking cannot remove these bands. My setting is ASCOM driver (Beta) via SGP, factory setting gain/offset, 11MP mode. I tried change USB setting to 30 or 50 but it didn't help or images broken into 3 windows. Could you suggest for any solution?

Regards,
KJ

7
Hi
Thank you very much. It works now after changing to another computer.
Best wishes and happy new year

8
Hi,
I have similar problem of 294m cannot connect with CFW2 in SGP. I tried the Beta version of All in one software and Frank's ascom driver but it does not work. Do I need to buy a new CFW3?

9
Image Issue Q&A / Re: Strange amp glow pattern in 163m
« on: May 12, 2020, 07:19:53 AM »
Thank you for your response. Here is the link to my dropbox https://www.dropbox.com/sh/6ll07yk5d5j28up/AAC3LG8Hkq9Qz5tYR6HWIqT2a?dl=0

10
Image Issue Q&A / Strange amp glow pattern in 163m
« on: May 11, 2020, 07:38:57 PM »
Hi,
I have a problem of a strange pattern of amp-glow in long exposure of 163m. It looks like step-pattern shadow in the lower aspect of images, very difficult to eliminate from calibration frames. My system includes QHY163m, QHY cfw2m, Optolong filters, QHY OAG, Takahasi TSA120 with TOA35 flatener.  I attach a jpeg image of my Ha master flat to show the amp-glow pattern. All images were shot with SGP.

11
Image Issue Q&A / Re: Vertical band artefact in QHY10
« on: December 19, 2019, 11:35:19 PM »
Thank you. I think it due to poor contact of 9-pins cable. Will test again tonight.
Kijja

12
Image Issue Q&A / Re: Vertical band artefact in QHY10
« on: December 19, 2019, 02:57:38 AM »
I use the QHY10ascom driver

13
Image Issue Q&A / Re: Vertical band artefact in QHY10
« on: December 18, 2019, 09:22:37 PM »
Hi
The problem has occurred amongst SGP users. The latest SGP version tried to fix it. I can take images with SGP again but image quality was very bad  Images were yellow and grainy. Any suggestions?

14
Image Issue Q&A / Re: Vertical band artefact in QHY10
« on: December 12, 2019, 06:52:27 PM »
Hi,
Ezycap works fine. So please make a new ascom drivers.
Kj

15
Image Issue Q&A / Re: Vertical band artefact in QHY10
« on: December 11, 2019, 08:16:53 PM »
I use SGP only. Will try with EZCap.

Pages: [1] 2